|
Weathermatic makes a wide variety of sprinklers to
fit all of your landscape and turf irrigation needs - including pop-up
spray heads, rotary gear drives, large turf impacts, and specialty
nozzles for most applications.
Using state-of-the-art
technology and superior design, Weathermatic sprinklers provide
you with the most accurate precipitation and even
distribution available today. Water conservation is built-in
to all of our matched precipitation and low
angle spray nozzles, as well as the uniform distribution
of our family of rotors.
LX Series Sprays
The all new
LX Series spray heads accept all industry-standard female threaded
nozzles, and features the exclusive T-Plug flush cap.
High-pop sprinklers
featuring the LX Adjustable and 5500 Series nozzles.
Available in 2'', 4'', 6" and 12" heights. The 6" and 12"
models have side inlets in addition to the standard bottom inlet,
and all models feature a pressure-activated wiper seal, stainless
steel spring, and arc location ratchet.
Easy Grip ribbed
body and cover makes installation easy even in wet conditions.
30 Series Sprays
High-pop sprinklers
featuring our performance engineered 200, 300, and 400 Series
nozzles.
30 Series
are available in 2'',4'',6" and 12" heights. The 6" and 12"
models have side inlets in addition to the standard bottom inlet,
and all models feature a pressure-activated wiper seal, stainless
steel springs, and arc location ratchet. The optional CV-30
check valve is easily field installed on all 30 series
heads.
- LX Series
Adjustable Nozzles
Four Models - 10A, 12A, 15A, 17A
Standard and low angle trajectory (#10A)
Radius- from 10' to 19'
Precip rate from 1.30 to 2.28 in/hr.
Adjustable from 25° to 360°
Pressure from 20-40 psi
- 200 Series
Plastic MPR nozzles
Standard and low angle trajectory
Radius- from 10.5' to 15'
GPM- from 0.6 to 3.7
Flow adjustment screw
200 SST side strip available
- 300 Series
Brass MPR nozzles
Standard and low angle trajectory
Radius- from 10' to 15'
GPM- from 0.6 to 3.7
Flow adjustment screw
End Strip, Center Strip, and Flats available
- 400 Series
Brass Milled MPR Nozzle
Ultimate Performance and Selection
Standard and low angle trajectory
Spacing from 3' to 24'
Reinforced edge provides superior border watering
Radius- 5' to 18'
GPM- 0.3 to 7.0
- 5500 Series
Brass MPR nozzles
Universal female thread
Radius- from 9' to 15'
GPM- from 0.5 to 5.2
Spacing from 12' to 20'
Reinforced edge provides superior border watering
Wide selection of fixed performance patterns
Turbo Gear Drive
Rotors
The popular
Turbo family of gear drive rotors are designed for the most demanding
applications. Long life performance is built-in to the T3,
T3s, and CT70 by using high-strength materials and
a sealed, lubricated drive mechanism. The perfect choice for "dirty
water" applications, these sprinklers feature a unique internal
filter and large area strainer to insure operation in the worst
water conditions.
The exclusive
"Arc Adjust Ring" on part circle models, makes adjustment
easy - wet or dry. Field changeable nozzles allow
user to change in seconds to match precipitation rates or adapt
to site conditions.
- T3 & T3s
shrub models
Full or Part Circle Models (part circle only on T3s)
3/4" IPS inlet
Adjustable from 40 to 360 degrees
"Ready Check" check valve standard (T3)
Rubber Cover standard
Full Wiper Seal - resists external debris
Safety Clutch - protects gear train from damage
Radius - 28' to 53'
Flow - 1 to 15 GPM
Operating Pressure- 20 to 65 PSI
- CT70
Full or Part circle models
1" IPS inlet
Adjustable from 40 to 360 degrees
"Ready Check" check valve standard
Rubber Cover standard
Full Wiper Seal - resists external debris
Safety Clutch - protects gear train from damage
Radius - 49' to 75'
Flow - 9.8 to 30 GPM
Operating Pressure - 40 to 90 PSI
PK and K Series
Impacts
These long range
rotary sprinklers are recommended for golf courses, parks, athletic
fields and other large turf areas. Heavy duty construction ensures
long life and trouble free service.
The PK and
K Series impact rotary sprinklers feature high performance
brass nozzles, heavy duty plastic (PK) or cast aluminum (K) housings
and our unique patented arm spring adjustment which
enables fine-tuning of rotation speed for optimizing performance.
Diffuser pins for distance control and stream break
up are standard on all part circle models, and all internal components
are easily removed as an integral assembly for fast service.
Performance
Data
| Model
# |
Operating
Pressure
|
Radius/Diameter
|
GPM-Flow
|
| PK50AP |
40
- 80 psi
|
41'
- 47' Rad.
|
3.6
- 7.8
|
| PK60AP |
40
- 80 psi
|
44'
- 51' Rad.
|
6.7
- 13.8
|
| PK70AP |
50
- 90 psi
|
53'
- 63' Rad.
|
10.5
- 20.8
|
| |
| PK50AF |
40
- 80 psi
|
82'
- 94' Dia.
|
3.6
- 7.8
|
| PK60AF |
40
- 80 psi
|
87'
- 98' Dia.
|
6.7
- 13.3
|
| PK70AF |
50
- 90 psi
|
102'
- 129' Dia.
|
12.5
- 24.3
|
| PK80AF |
60
- 100 psi
|
114'
- 147' Dia.
|
22.0
- 40.7
|
| |
| K90P |
60
- 100 psi
|
85'
- 101' Rad.
|
37.0
- 78.3
|
| K90F |
60
- 100 psi
|
170'
- 202' Dia.
|
37.0
- 78.3
|
Specialty Nozzles
- 102 Bubbler
Fully adjustable flow
Wide pressure range
Flow - 1.1 to 2.3 GPM
Spacing - 1 to 3 feet
Pressure - 10 to 60 PSI
1/2" IPS connection
- 106 Bubbler
Pressure Compensating
Constant flow rate over wide pressure range
Flow - .25, .50, 1.0, and 1.5 GPM rates
Spacing -1 to 3 feet
Pressure - 15 to 90 PSI
1/2" IPS connection
- 404 Jet
Irrigator
Stream bubbler
Fits 30 Series and 95P shrub body
20 to 30 PSI
4 Jets(Qtr.) - 3' to 4.5' Radius@ .6 - .72 GPM
7 Jets(Half) - 3' to 5' Radius@ .6 - .72 GPM
12 Jets(Full) -4.5' to 6' Radius@ .72 - .82 GPM
- 105 Bed
Spray
Fixed Flat spray
Full circle only
Pressure - 10 to 18 PSI
Diameter - 11' to 14'
GPM - .9 to 1.2
- 95P Shrub
Body
Adapts all 200, 300, and 400 series nozzles to 1/2" IPS risers.
|
